Xerox Phaser 5400 安装指南

Dynamic addressing (DHCP)

The TCP/IP address is assigned automatically by the server.

1.

Press Menu Up or Menu Down until you see:

2.

Press Item Up or Item Down until you see:

3.

Press Value Up or Value Down until you see:

4.

Press Enter.

5.

Power off the printer.

6.

Power the printer on and allow time for an IP address to be 

assigned by the DHCP server (this time may vary depending on 

network traffic).

7.

Perform the steps contained in the section of this document 
entitled Appendix A: Print the Configuration Sheet.

8.

Obtain the TCP/IP address from the Configuration Sheet.

9.

Update the lease time, if necessary, depending on your 

printer-usage patterns.

If your network is using this protocol to assign TCP/IP 

addresses, be aware that the lease on the assigned address 

can run out if your printer is taken off the network for longer 
than the allocated lease time.