Xerox Phaser 2135 安装指南
Quick Network Install Guide
29
Dynamic addressing (BootP)
The TCP/IP address is assigned automatically by the Server. Follow
the steps below:
the steps below:
1.
Press Menu Up or Menu Down until you see:
Menu
Ethernet Menu
2.
Press Item Up or Item Down until you see:
Ethernet Menu
IP Address Resolution
3.
Press Value Up or Value Down until you see:
IP Address Resolution
BootP
4.
Press Enter.
5.
Update the BootP server's /etc/ethers or /etc/bootptab and the
/etc/hosts files with a host name, TCP/IP and Network addresses.
Consult your UNIX documentation for more BootP server
configuration details.
Consult your UNIX documentation for more BootP server
configuration details.
6.
Power off the Printer.
7.
Power the printer on and allow time for an IP address to be
assigned by the BootP server (this time may vary depending on
network traffic).
assigned by the BootP server (this time may vary depending on
network traffic).
8.
Perform the steps contained in the section of this document
entitled Appendix A: Print the Configuration Sheet.
entitled Appendix A: Print the Configuration Sheet.
9.
Obtain the TCP/IP address from the Configuration Sheet.