Xerox Phaser 560 产品宣传页
14
Phaser 560 Color Laser Printer
Unpacking
Follow the procedures detailed in the
User Manual
or the
Quick-Start
Installation
. If you have any problems, in the U.S., contact Technical Support
at
1-800-835-6100
. Outside the U.S., contact your local Tektronix
representative.
1.
Install the 4 toner cartridges.
2.
Close the toner access door.
3.
Prepare the imaging unit.
■
Open the printerÕs front door.
■
Turn the upper lever
clockwise
to align the leverÕs triangles
with the triangle on the surface of the imaging unit.
■
Close the printerÕs front door.
4.
Connect the power cord and cables.
Note
Wait 5 minutes before turning on the power to the printer; this
allows the imaging unit recovery time from exposure to light.
allows the imaging unit recovery time from exposure to light.
5.
Make a few test prints to clear any excess toner.
560FS-15