Xerox Phaser 780 Tabloid 安装指南
166
PhaserShare Networking Manual
15
Disabling Protocols
7.
Disabling HTTP:
To return the printer to normal operation, go immediately
to Step 8; to continue and disable the HTTP protocol, follow these steps:
a.
Press
---->
; the front panel displays
HTTP
.
b.
Press
Menu
again; the front panel displays the current status of the
protocol:
HTTP:Enabled or HTTP:Disabled
. The current status
is marked with an asterisk (
*
) in the upper-right corner of the display.
c.
Press
---->
until the front panel displays
HTTP:Disabled
.
d.
Press
OK
to disable the protocol; the front panel briefly displays
Selected
, then it displays
HTTP
.
8.
Return the printer to normal operation:
a.
Press Exit until the front panel displays
Network Settings
.
b.
Press Exit again.
■
If you have changed any parameters that require a printer reset to
take effect, you will be prompted to reset the printer. If you press
take effect, you will be prompted to reset the printer. If you press
Reset
, the printer resets. If you press
Resume
, the front panel
displays
Network Settings
. Press Exit; the printer returns to
normal operation, but the changes you have made will not take
effect until the next time the printer is reset.
effect until the next time the printer is reset.
■
If you have not changed any parameters that require a printer reset
to take effect, the front panel displays
to take effect, the front panel displays
Ready
.