Xerox Phaser 780 Tabloid 产品宣传页
86
Phaser 780 Color Laser Printer
7
Connecting Peripheral Devices
Connecting SCSI devices
Required items
■
A SCSI peripheral cable for each SCSI device.
■
The printer uses a SCSI-2, 50-pin connector.
■
One SCSI cable terminator, unless one of the SCSI devices
has an internal
terminator.
To order supplies and accessories, contact your local dealer or visit the Tektronix
web site at www.tek.com/Color_Printers/supplies.
web site at www.tek.com/Color_Printers/supplies.
Connection overview
1.
Turn off the printer and SCSI devices.
2.
Set the SCSI ID numbers.
3.
Connect cables to SCSI devices.
4.
Connect cable to printer.
5.
Check termination.
6.
Turn on SCSI devices.
7.
Turn on printer.
012-1465-00
SCSI-2 HD to SCSI-1 LD cable
50-pin high-density plug to 50-pin
low-density plug;
2.0 meters (6.56 feet)
low-density plug;
2.0 meters (6.56 feet)
Connects the printer’s SCSI port to a hard disk drive or a scanner SCSI
port.
port.
012-1299-00
SCSI-1 LD to Macintosh SCSI
cable
cable
50-pin low-density plug to
Macintosh SCSI 25-pin plug
Macintosh SCSI 25-pin plug
Combine with 013-0297-00 to connect the printer’s SCSI port to a hard
disk drive with Macintosh SCSI 25-pin plug.
disk drive with Macintosh SCSI 25-pin plug.
013-0297-00
SCSI-1 LD to SCSI-2 HD adapter
SCSI adapter: converts 50-pin
low-density plug to 50-pin
high-density plug
low-density plug to 50-pin
high-density plug
Use with either 012-1465-00 or 012-1299-00 to convert a low-density
SCSI connection to a high-density SCSI connection.
SCSI connection to a high-density SCSI connection.