Xerox Phaser 780 Tabloid 产品宣传页
Copyright
©
1998 by Tektronix, Inc. All rights reserved.
075-0438-AA
Instruction Sheet
Replacing the exit tray— P.N. 118-9800-0X
For assistance while replacing the exit tray, contact you local Tektronix
representative. In the U.S. and Canada, call 1-800-835-6100.
representative. In the U.S. and Canada, call 1-800-835-6100.
1.
Turn the printer off.
2.
Collapse the exit tray extensions.
3.
Close the exit tray.
4.
Remove the front pivot arm of the tray from the front pivot hole in the
printer frame.
printer frame.
5.
Remove the rear pivot arm of the tray from the rear pivot hole in the
printer frame and remove the exit tray.
printer frame and remove the exit tray.
Reverse these steps to install the exit tray. Pull down on the leaf spring located
on the front pivot arm and insert the front arm into the front pivot hole, making
sure the leaf spring rests against the outer printer frame.
on the front pivot arm and insert the front arm into the front pivot hole, making
sure the leaf spring rests against the outer printer frame.
780-5-67
Rear pivot arm
Leaf spring
Position of spring when tray is installed
Exit tray
Phaser
®
780