Xerox Phaser 780 Tabloid 安装指南

The following procedure is an example spooler configuration that will work for  
many BSD systems, including SunOS 4.x and 5.x (Solaris 1.x and 2.x) and Digital 
UNIX.

Modify the /etc/hosts file to identify the printer to the workstation and modify the 
/etc/printcap file to describe the printer to the workstation:

Log on to your system as root.

Make a backup copy of the /etc/hosts file.    

Edit /etc/hosts and add a line that defines the printer's IP address and its 
name. The IP address you enter here for the printer must be the same 
address you specified as the printer's IP address when it was 
configured. The name is the name by which your workstation identifies 
the printer (you will enter this same remote name in your /etc/printcap 
file in the next step).  For example:

134.62.33.138  Phaser740

In this example, 

134.62.33.138

 is the printer’s IP address and 

Phaser740

 is the printer’s remote name.

Make a backup copy of the /etc/printcap file.

Edit /etc/printcap and add an entry for your printer.  Refer to the 
following example and the table “Descriptions of printcap parameters” 
on page 34 to create your entry.

You need superuser privileges to edit this file.