Xerox Phaser 750 安装指南

Windows NT (non-Intel computers)

These procedures are valid for Windows NT version 3.x and 4.x.  For information about 
driver installation for later versions of Windows NT, contact Tektronix technical support 
or visit the Tektronix web site:

 www.tek.com/Color_Printers/support/

Setting the printer’s IP address

There are three ways to set the printer’s IP address:

■

Use the printer’s front panel.  For more information, see your printer’s networking 
setup guide.

■

Use DHCP.  For more information, see your printer’s networking setup guide.

■

Download a PostScript utility file.  For more information, see the README file on the 
printer’s CD-ROM.  The README file is in the UTILS directory.

Adding the Windows NT 4.0 driver on a Windows 
NT 4.0 server or workstation 

The Windows NT 4.0 PostScript driver is a PPD-based driver.  Follow these instructions to 
add or update the Tektronix Phaser PPD for use with Windows NT 4.0.  Adding this 
support gives your printer access to Tektronix page sizes, tray selection, TekColor color 
corrections, and resident fonts.  

This update procedure provides printer page-size information for Windows NT 
applications.  These instructions assume a basic familiarity with Windows NT operation 
and terminology.  For additional information about Windows NT, refer to your Microsoft 
Windows NT documentation.  

Note

You may need the Windows NT 4.0 CD-ROM or your printer’s software CD-ROM 
to complete this procedure.