Xerox Phaser 750 安装指南

Creating an AppleTalk port

In the Printer Port dialog box, double-click the AppleTalk Printing Devices port.  If 
the AppleTalk Printing Devices port is not listed in the Printer Port dialog box, the 
Microsoft Services for Macintosh needs to be added to the Windows NT machine:

In Control Panel, double-click Network; the Network Settings dialog box 
appears.

In the Network Settings dialog box, click Add Software; the Add Network 
Software dialog box appears.

In the Add Network Software dialog box, click the drop down menu for Network 
Software.  In the list, select Services for Macintosh, then click OK to install the 
service.  The original Windows NT distribution diskettes are needed during 
installation.  To apply these changes, restart Windows NT.

2.

In the Available AppleTalk Printing Devices dialog box, select the zone where the 
printer resides.  If no zone name appears, double-click the zone icon.  

3.

Windows NT searches for all AppleTalk devices in that zone and displays a list; 
double-click your printer.

4.

Windows NT prompts you to capture the printer; click No.  (Capturing the printer causes 
it to disappear from the Chooser.)

Set up sharing

If this printer is to be shared on the network, perform the following steps:

In the Create Printer dialog box, check the option Share this printer on the network.

2.

Enter any name you want for the Share Name.