Xerox Phaser 750 安装指南
PhaserShare Networking Manual
3
Token Ring
Token Ring connections and indicators
The PhaserShare Token Ring card has the following connections and indicators on the rear
panel:
panel:
1.
Shielded Twisted Pair (STP; IBM Type 1) connector (DB-9).
2.
Unshielded Twisted Pair (UTP; IBM Type 3) connector (RJ-45).
3.
Ring speed indicator (yellow);
on
indicates 16 Mbps,
off
indicates 4 Mbps.
4.
TX indicator (yellow);
blinks
while the interface is transmitting.
5.
Connection indicator (green);
on
indicates that the card is asserting its ring insertion
control signal.
6.
RX indicator (green);
blinks
while the interface is receiving.
Note
The STP port on the PhaserShare Token Ring card
supports cable lengths up to 150 meters (492 feet) from
the interface to the MAU (Medium Access Unit),
including lobe and patch cables.
supports cable lengths up to 150 meters (492 feet) from
the interface to the MAU (Medium Access Unit),
including lobe and patch cables.
9789-06
PhaserShare
TM
Series B
Token Ring Card
TX
RX
INS
16
Mbs
STP
UTP
1
2
3
4
5
6