Xerox Phaser 790 用户指南
Xerox Phaser 790
5–1
Connecting to the network
This chapter discusses the basic stages of connecting the printer to the
network, provides an overview of network requirements and protocol
diagrams, and describes how to physically connect the printer to an
established network.
network, provides an overview of network requirements and protocol
diagrams, and describes how to physically connect the printer to an
established network.
Network installation is generally performed by a network or printing
administrator and involves four stages:
administrator and involves four stages:
•
Physical connection of the printer to the network and to the
server. If this step includes preparation of a network node and
routing of the printer network cable, refer to the network
documentation for specific installation instructions.
server. If this step includes preparation of a network node and
routing of the printer network cable, refer to the network
documentation for specific installation instructions.
If you plan to run the Command WorkStation software from a remote
computer, you will need to install the software and connect the Command
WorkStation computer to the network along with the printer.
computer, you will need to install the software and connect the Command
WorkStation computer to the network along with the printer.
•
Configuring UNIX, Windows NT 4.0 and IPX (Novell)
network
servers to provide client access to the Phaser 790 as a color
PostScript or PCL printer. No special configuration of AppleShare
servers is required. Refer to the chapter Setting up the network
server.
PostScript or PCL printer. No special configuration of AppleShare
servers is required. Refer to the chapter Setting up the network
server.
•
Setting up the printer for the network environment. At the Printer
Control Panel, configure the Server Setup, Network Setup, and
Printer Setup. You can then configure the remaining setup
options from the Printer Control Panel, the Command
WorkStation, or remote workstation with WebSetup. You can also
calibrate the Phaser 790. Refer to the chapters, Performing the
setup from the Printer Control Panel and Using ColorWise Pro
Tools.
Control Panel, configure the Server Setup, Network Setup, and
Printer Setup. You can then configure the remaining setup
options from the Printer Control Panel, the Command
WorkStation, or remote workstation with WebSetup. You can also
calibrate the Phaser 790. Refer to the chapters, Performing the
setup from the Printer Control Panel and Using ColorWise Pro
Tools.
5