Xerox Phaser 790 用户指南
7. Performing the setup from the Printer Control Panel
Xerox Phaser 790
7–15
SMB Setup
Server Message Block (SMB) is a point-to-point file sharing and
printing protocol and the default printing method of most Windows
applications. SMB runs on top of TCP/IP and does not require IPX.
When file and printer sharing for Microsoft clients is enabled, SMB can
be run on Windows 95/98, Windows 2000, and Windows NT.
printing protocol and the default printing method of most Windows
applications. SMB runs on top of TCP/IP and does not require IPX.
When file and printer sharing for Microsoft clients is enabled, SMB can
be run on Windows 95/98, Windows 2000, and Windows NT.
1.
Press the Offline button and press the Menu button until the
Enable SMB option is displayed. Use this option to enable
network communication using SMB.
Enable SMB option is displayed. Use this option to enable
network communication using SMB.
2.
At the Use Name Server screen, select Yes or No (No is the
default). Select Yes to designate a specific WINS (Windows
Internet Name Server) server as an SMB server.
default). Select Yes to designate a specific WINS (Windows
Internet Name Server) server as an SMB server.
A message prompts you to enter the IP address of the server.
3.
Use the up and down arrow buttons to enter the IP address of
the desired WINS server.
the desired WINS server.
A message prompts you to enter the Server Name.
4.
Use the up and down arrow buttons to enter a name for the
printer (SMB server).
printer (SMB server).
A message prompts you to enter any comment about the server.
5.
Use the up and down arrow buttons to enter a comment about
or name of the printer (SMB server), such as Production use
only. This comment will identify the printer in the Windows
Network Neighborhood. Once set, this comment will display in the
second line when the Server Comment screen is displayed. When
the printer is selected on a client machine, the server comment is
displayed under the Details section of the Server information
window.
or name of the printer (SMB server), such as Production use
only. This comment will identify the printer in the Windows
Network Neighborhood. Once set, this comment will display in the
second line when the Server Comment screen is displayed. When
the printer is selected on a client machine, the server comment is
displayed under the Details section of the Server information
window.
6.
Press Item/Enter to display the Domain Name option. Use the up
and down arrow buttons to enter the workgroup or domain in
which you want the printer to display. Use only uppercase letters.
and down arrow buttons to enter the workgroup or domain in
which you want the printer to display. Use only uppercase letters.