Xerox Phaser 790 用户指南
12. Installing user software in a Macintosh OS environment
Xerox Phaser 790
12–2
Setting up the Phaser 790 as a PostScript printer
To set up the Phaser 790 as a PostScript printer, install the PostScript
printer description file (PPD) that corresponds to the printer. The PPD
files are provided on the User Software CD.
printer description file (PPD) that corresponds to the printer. The PPD
files are provided on the User Software CD.
Printer drivers provide a way to communicate information on print jobs
between your applications, the Phaser 790, and any other PostScript
printer connected to your workstation.
between your applications, the Phaser 790, and any other PostScript
printer connected to your workstation.
Use the following procedures whether you are installing from the User
Software CD or installing with printer files previously downloaded using
the Installer WebTool.
Software CD or installing with printer files previously downloaded using
the Installer WebTool.
Before you begin, print a Configuration Page for the printer. For
specific procedures, refer to the chapter Performing the setup from the
Printer Control Panel.
specific procedures, refer to the chapter Performing the setup from the
Printer Control Panel.
1.
Perform one of the following:
•
Insert the User Software CD in your CD-ROM drive and open
the English: Printer Driver folder.
•
To install from files you downloaded using the Installer
WebTool, open the Printer Driver folder on your hard disk.
2.
Double-click the AdobePS 8.6 Installer icon.
A Warning dialog box is displayed.