Xerox Phaser 740 用户指南
10
PhaserLink Printing Software
2
Setting Up and Configuring Printers from the PhaserLink Printing Web Page
Optional fields on the PhaserLink Printing Settings web page
■
PhaserLink Printing Enabled:
Choose Yes if you want to use PhaserLink
Printing Software with this printer. Choose No to disable PhaserLink
Printing Software for this printer.
Printing Software for this printer.
■
POP3 Polling Interval:
Specify how often (in minutes) you want PhaserLink
Printing Software to check for new messages on the printer’s POP3 email
server. The default value is 3 minutes; the maximum value is 32767
minutes.
server. The default value is 3 minutes; the maximum value is 32767
minutes.
■
PhaserLink Printing Job Password:
Enter the password for the printer, if it
has one. If you enter a password in this field, it should match the password
set for the printer in the Destination Manager (as described on page 17).
(Do not confuse this password with the POP3 password described on page
9, which provides access to the POP3 email server.)
set for the printer in the Destination Manager (as described on page 17).
(Do not confuse this password with the POP3 password described on page
9, which provides access to the POP3 email server.)
■
Allow PhaserLink Printing Jobs from (Hosts):
If you want to limit access to
the printer to selected hosts, enter the IP addresses of those hosts in this
field. Separate multiple hosts with a single space. The maximum number
of characters you can specify in this field is 256. This field is
case-insensitive. Leaving this field blank implies unrestricted access to the
printer.
field. Separate multiple hosts with a single space. The maximum number
of characters you can specify in this field is 256. This field is
case-insensitive. Leaving this field blank implies unrestricted access to the
printer.
■
Allow PhaserLink Printing Jobs from (Users):
If you want to limit access to
the printer to selected users, enter the user IDs in this field. Separate
multiple IDs with a single space. The maximum number of characters you
can specify in this field is 256. This field is case-insensitive. Leaving this
field blank implies unrestricted access to the printer.
multiple IDs with a single space. The maximum number of characters you
can specify in this field is 256. This field is case-insensitive. Leaving this
field blank implies unrestricted access to the printer.
■
System Location:
Enter the printer’s location, such as Building R, Room
360
. If you are unsure of the printer’s location, contact your System
Administrator.
■
System Contact:
Enter the name (not an email address) of the person who
will receive the print jobs from this printer.
Applying your changes
1.
On the View and Configure PhaserLink Printing Settings web page, click
the Do/Apply button.
the Do/Apply button.
2.
If a PhaserLink password has been set, supply that password in the
Validation Password
Validation Password
field on the View and Configure PhaserLink Printing
Settings web page. See your PhaserShare Networking Manual on your
printer’s software CD-ROM for more information.
printer’s software CD-ROM for more information.