Xerox Phaser 740 产品宣传页
Repacking and Shipping Instructions
3
Repacking Your Printer
Repacking the printer
Power off
1.
Turn off the printer.
2.
Remove the power cord and all cables.
Prepare the media tray(s)
1.
Remove the media tray from the printer, and remove the media from the
tray. If you have the Duplex Unit and Lower Tray Assembly installed,
remove the Duplex Unit. Repack it according to instructions on page 7.
tray. If you have the Duplex Unit and Lower Tray Assembly installed,
remove the Duplex Unit. Repack it according to instructions on page 7.
2.
Press down on the media tray’s metal plate until it clicks and locks.
3.
Insert the cardboard lock through the rear slot in the media tray, and turn it
180˚ clockwise to lock it in position.
180˚ clockwise to lock it in position.
4.
Re-insert the tray into the printer.
5.
If you have additional media trays, put a cardboard lock into each of them,
then repack the media trays for shipping or storage in their packing boxes.
then repack the media trays for shipping or storage in their packing boxes.
Prepare the imaging unit
1.
Open the printer’s front door.
2.
Make sure that the two small knobs are tightened. If they are not, turn them
clockwise
to tighten.
560FS-07
PAPER
A4
PAPER
A4