Xerox Phaser 740 产品宣传页
102
Phaser 740 and 740L Laser Printers
4
Troubleshooting
Jam at D
Solution 1
C
A
U
T
I
O
N
The Fuser is hot; to avoid personal injury, handle only the areas marked in blue. If
desired, open the front door and wait for the Fuser to cool before touching it.
desired, open the front door and wait for the Fuser to cool before touching it.
1.
Check the exit opening for media that has jammed and folded like an
accordion. It is especially difficult to see if the media is transparency film.
accordion. It is especially difficult to see if the media is transparency film.
2.
Open the front door to access the Fuser.
3.
Pull open the access door (above the plastic output tray); the media is
visible.
visible.
4.
On the Fuser, turn the large blue knob counterclockwise.
5.
Remove the media from inside the access door.
C
A
U
T
I
O
N
If the Fuser knob will not turn, do not force it or you may damage the Fuser.
Instead, remove the Fuser and Fuser Roll; turn the Fuser’s large blue knob to
release the jammed media.
Instead, remove the Fuser and Fuser Roll; turn the Fuser’s large blue knob to
release the jammed media.
0236-32
3
4
2
A/Letter
Paper