Xerox Phaser 740 产品宣传页
110
Phaser 740 and 740L Laser Printers
4
Troubleshooting
Cleaning the sensor
If your printer’s front panel displays
Error 30
, clean the sensor inside the printer.
1.
Turn the printer off and open the printer’s front door.
2.
Remove the Imaging Unit:
a.
Loosen the two thumbscrews by turning them counterclockwise.
b.
Turn the lower lever 180˚ counterclockwise.
c.
Slide the Imaging Unit out of the printer and cover it to protect it from
light exposure.
light exposure.
3.
Use a dry, lint-free cloth to wipe the sensor (inside the slot).
4.
Re-insert the Imaging Unit.
5.
Close the printer’s front door and turn on the printer.
Cleaning other rollers
When you clean any of the other rollers in the printer, always use a lint-free cloth.
C
A
U
T
I
O
N
Do not clean the transfer roller; alcohol and pressing on the roller can damage the
roller and cause print-quality problems.
roller and cause print-quality problems.
0236-39
a
b
9698-64