Xerox Phaser 740 产品宣传页

The printer allows you to control the settings listed in the table below.  From the 
printer’s 

 menu, select 

 to print a Copier Menu. 

Selects up to 999 copies.  To change the desired number, press 

 or 

.

Press down and hold 

 or 

 to auto-increment the value.  

Release the button when the desired number of copies is 
displayed.

Selects the type of color reproduction from the following: 

■

Color Image:  For full-color images. The image is reproduced 

with as accurate as possible color matching.

■

Color Text:  For images with colored text, line art or charts.  The 

image is reproduced in full color, but text colors are accentuated 
and scanning occurs at a higher resolution to maintain text 
definition.

■

Gray Scale:  For copying or creating monochrome images. The 

image is reproduced in shades of gray. 

■

Black and White:  The image is reproduced in full white and full 

black only.  Especially suitable for copying line drawings.  

Lightens or darkens your prints on a scale of –10 (lightest) to 
+10 (darkest). 

Brightens or increases the saturation of all colors or reduces the 
saturation (add black) on a scale of –10 (blackest) to +10 (most 
saturated, brightest).  Zero, the default, is neutral. 

Enlarges or reduces the size of the copy image from 
approximately 25% to 1000% of the original’s image size, 
depending on your scanner.  The default setting is 100%.   To 
change the scale value, press 

 or 

.

Press down and hold 

 or 

 to auto-increment the value.  

Release the button when the desired number of copies is 
displayed.

For additional information on using the scaling function to enlarge 
and reduce copies, refer to “Placing and scaling images” on 
page 154. 

Selects the size of your original image or input.

■

The options available (for example, Letter, Legal, Tabloid, A3) 

will depend on the scan area of your scanner.

■

Tray Size, the default selection, copies an area equal to the size 

of the media in the selected tray.  If the media in the tray is larger 
than the area the scanner can image, it will scan the largest 
possible area and scale the image up to fit the media, without 
distortion.

Selects the media tray from which your copy or output will be 
printed.

■

The options available will depend on the number of media trays 

in your printer.  

■

Changes the printer’s copier menu default settings and saves 

your own settings for the kinds of copies you typically make.

■

Sets the defaults to the printer’s original selections.