Xerox Phaser 740 产品宣传页
Advanced Features and Troubleshooting Manual
33
Advanced Print Features
2
Adjusting margins
This printer provides a front-panel interface to adjust the page margins:
Adjusting margins for a single-sided print
You might want to adjust the margins on a single-sided page if the image area is not
centered on the page. In other words, the margins are not even, relative to the outside
edge of the paper.
centered on the page. In other words, the margins are not even, relative to the outside
edge of the paper.
1.
In the front panel’s
Printer Defaults
menu, set the
Duplex
mode to
Disable
.
2.
Print the Margin Adjust page from the front panel.
a.
Press
Menu
.
b.
Scroll to
Calibrate Margins
. Press
Menu
; the display reads:
c.
Press
Print
.
3.
Determine if the margins need adjustment: use the page’s top- and
left-margin gauges to note how much the margins are off-center.
left-margin gauges to note how much the margins are off-center.
Single-sided print
■
Automatically prints when the printer has one tray only.
Duplex (Double-sided print)
■
Requires the Automatic Duplex/Lower Tray Assembly.
■
Duplex Unit must be installed in the upper tray slot.
■
In the front panel’s
Printer Defaults
menu,
Duplex
mode must be enabled.
Print Calibration Page
<--- ---> Print
0236-63