Xerox Phaser 140 用户指南
6
Troubleshooting
6-4
Phaser 140 Color Printer
Front panel displays Òprocessing dataÓ or Òwaiting for data,Ó
but the Þle does not print
but the Þle does not print
This is probably the result of a PostScript error. Reset the printer by turning
it off, then on again. Then load the PostScript error handler from the front
panel. For more information on using the PostScript error handler, see the
manual Phaser 140 Drivers and Utilities Printing Reference.
it off, then on again. Then load the PostScript error handler from the front
panel. For more information on using the PostScript error handler, see the
manual Phaser 140 Drivers and Utilities Printing Reference.
1.
Press the down (
ß) arrow key until the front panel displays this
message:
PRINT SAMPLES
2.
Press the right (
Þ) arrow key until the front panel displays this
message:
load error page
3.
Press the SELECT button. The printer exits the menu and loads the
PostScript error handler. After the error handler is loaded, the
printer should be ready for normal operation.
PostScript error handler. After the error handler is loaded, the
printer should be ready for normal operation.
4.
Send the print job again. If there is a PostScript error, the printer
will print a page reporting the speciÞc error.
will print a page reporting the speciÞc error.
SELECT