Xerox Phaser 140 用户指南
6
Troubleshooting
6-8
Phaser 140 Color Printer
Media does not load
■
Make sure that the paper selection lever is set to the
correct position:
correct position:
■
For automatic feeding of all media except envelopes, set the lever
toward the back of the printer. If the printer still has difÞculty
feeding transparencies, glossy paper, or back-print Þlm, try feeding
the sheets manually, one at a time.
toward the back of the printer. If the printer still has difÞculty
feeding transparencies, glossy paper, or back-print Þlm, try feeding
the sheets manually, one at a time.
■
For automatic feeding of thick paper, set the lever toward the front
of the printer. If the printer still has difÞculty feeding thick paper,
try feeding the sheets manually, one at a time.
of the printer. If the printer still has difÞculty feeding thick paper,
try feeding the sheets manually, one at a time.
■
For manual feed, set the lever toward the front of the printer.
■
For manual feed, be sure to insert a single sheet all the way into the
feeder. If the sheet is not inserted far enough, the printer cannot
feed the sheet properly.
feeder. If the sheet is not inserted far enough, the printer cannot
feed the sheet properly.
■
If back-print Þlm jams during manual feed, try putting a sheet of
plain paper behind the sheet of back-print Þlm in the input tray.
plain paper behind the sheet of back-print Þlm in the input tray.
Back position
Front position