Xerox Phaser 140 用户指南
6
Troubleshooting
6-12
Phaser 140 Color Printer
Blurred or too light
■
The selected print mode does not meet your needs, for example
you may be printing in draft mode (see ÒSelecting media type and print modesÓ on page 3-10).
you may be printing in draft mode (see ÒSelecting media type and print modesÓ on page 3-10).
■
The print media is not compatible with the printer. If you are
using coated paper, glossy paper, back-print film, or
transparencies, use only Tektronix media.
using coated paper, glossy paper, back-print film, or
transparencies, use only Tektronix media.
■
You may be printing on the wrong side of the paper.
Ink on paper edge
■
The inside of the printer may be soiled with ink (see ÒCleaning the printerÓ on page 4-12).
Prints are curled
■
Remove the print immediately and let it dry. Then roll it in the
direction opposite the curl.
direction opposite the curl.