Xerox Phaser 140 用户指南
2
Getting Set Up
2-32
Phaser 140 Color Printer
PC users: DOS and setting up ports
Check the list of supported printers in your DOS application for support of
the Phaser 140. If the list does not include the Phaser 140, use a generic color
PostScript driver.
the Phaser 140. If the list does not include the Phaser 140, use a generic color
PostScript driver.
Parallel port setup
If you are using the printer's parallel port, you should disable timeouts on
your computer's parallel port. Disabling timeouts ensures that large Þles
will print, even if data transmission is slow.
your computer's parallel port. Disabling timeouts ensures that large Þles
will print, even if data transmission is slow.
The DOS MODE command is used to disable timeouts on your computer's
parallel port. Type this command at the DOS prompt (if LPT1 is not
available, use LPT2):
parallel port. Type this command at the DOS prompt (if LPT1 is not
available, use LPT2):
MODE LPT1:,,P > NUL
See your DOS documentation for details on the MODE command.
You may want to add the MODE command to your AUTOEXEC.BAT Þle, so
that it takes effect every time you turn on your computer.
that it takes effect every time you turn on your computer.