Xerox Phaser 140 用户指南
User Manual
3-1
Chapter
3
Printing
Printing from a Macintosh
1.
Make sure that the Tektronix printer driver for the Macintosh has
been installed.
been installed.
2.
Select the driver:
a.
Select
Chooser
from the Apple menu.
b.
Select the Tektronix driver by clicking on the
Phaser 140
printer icon. (If it did not appear in the list of drivers, restart
your Macintosh and repeat the driver installation procedure.)
your Macintosh and repeat the driver installation procedure.)
A list of printers available in the current zone appears.
c.
Select the zone where your Phaser 140 is connected.
d.
Select the printer by name (default name is Phaser 140).
You can change the default printer name and EtherTalk zone
with the LaserWriter Utility, which is on the drivers and
utilities diskettes. See the Phaser 140 Drivers and Utilities
Printing Reference for instructions.
with the LaserWriter Utility, which is on the drivers and
utilities diskettes. See the Phaser 140 Drivers and Utilities
Printing Reference for instructions.