Xerox Phaser 340 用户指南
Using Different Printer Language Modes
D
Printing Reference
D-3
3.
Locate the installed files in the PHSR340 subdirectory inside the
PHSRTOOL directory on your hard disk, and open the
CONFIG.PS file in a text editor.
PHSRTOOL directory on your hard disk, and open the
CONFIG.PS file in a text editor.
The default values for the printer are 0 seconds for the job timeout and 40
seconds for the wait timeout. A timeout value of 0 indicates no timeout; the
printer waits indefinitely.
seconds for the wait timeout. A timeout value of 0 indicates no timeout; the
printer waits indefinitely.
In the following example, the timeouts are set to their default values.
3 dict begin
/Password() def
/JobTimeOut 0 def
/WaitTimeOut 40 def
currentdict end setsystemparams
1 dict begin
currentpagedevice /ManualFeedTimeout known
{ /ManualFeedTimeout 60 def } if
currentdict end setpagedevice
4.
To change CONFIG.PS to specify different timeouts, substitute
new values for 0 and 40 in the JobTimeOut and
WaitTimeOut lines.
new values for 0 and 40 in the JobTimeOut and
WaitTimeOut lines.
Permitted timeout values are as follows:
■
JobTimeOut: 0 to 999
■
WaitTimeOut: 0, or 15 to 999
■
ManualFeedTimeout: 0 to 999
■
To specify no timeout, use 0
Note
To avoid timeouts or job cancellation on Windows multiple-page
or multiple-copy print jobs, you may want to set the
WaitTimeOut to a high value or to 0 (zero).
or multiple-copy print jobs, you may want to set the
WaitTimeOut to a high value or to 0 (zero).