Xerox Phaser 1235 安装指南

Dynamic addressing (RARP/BOOTP

1

)

The TCP/IP address is assigned automatically by the Server. Follow 
the steps below:

1.

Press Menu Up or Menu Down until you see:

2.

Press Item Up or Item Down until you see:

3.

Press Value Up or Value Down until you see:

4.

Press Enter.

5.

Update the RARP/BOOTP

1

 server's /etc/ethers or /etc/bootptab 

and the /etc/hosts files with a host name, TCP/IP and Network 
addresses. Consult your UNIX documentation for more 
RARP/BOOTP

1

 server configuration details.

6.

Power off the Printer.

7.

Power the printer on and allow time for an IP address to be 
assigned by the RARP/BOOTP

1

 server (this time may vary 

depending on network traffic).

8.

Perform the steps contained in the section of this document 
entitled Appendix A: Print the Configuration Sheet.

9.

Obtain the TCP/IP address from the Configuration Sheet.

1

 RARP is not functional even when selected.  Only BOOTP is 

functional.