Xerox Phaser 1235 产品宣传页
110
Phaser 1235 Network Color Printers
Using Printer Options
Memory
Note
DISCHARGE STATIC ELECTRICITY: The controller board and internal printer
options (Hard Drive, Token Ring Card, Memory) are sensitive to static electricity.
Before installing or removing an internal option, discharge static electricity from
your body by touching something metal, such as the metal back plate on any
device plugged into a grounded power source. If you walk around before
finishing the installation, again discharge any static electricity.
options (Hard Drive, Token Ring Card, Memory) are sensitive to static electricity.
Before installing or removing an internal option, discharge static electricity from
your body by touching something metal, such as the metal back plate on any
device plugged into a grounded power source. If you walk around before
finishing the installation, again discharge any static electricity.
Installation
Follow this procedure to install additional memory.
1
Turn off the printer and disconnect cables and
power cord.
power cord.
2
Remove the screws that secure the controller board
and slide the controller board out of the printer.
Place it on a stable horizontal surface.
and slide the controller board out of the printer.
Place it on a stable horizontal surface.
3
Pull apart the clips on either side of an available
memory slot.
memory slot.