Xerox Phaser 1235 产品宣传页

Printer Features

Your printer has many special features that enable you to achieve the results you need for 
your specific print job. Features vary according to the options installed on your printer. 
This section will help you become familiar with your printer's features and capabilities.

Media Handling

Your printer has several media input sources and output destinations as described below.

Input Sources

■

The standard 

functions as either a single-sheet 

manual-feed tray or a tray for up to 100 sheets of standard 20-lb. (75

g/m

2

) bond paper, 

up to 80 standard or premium transparency sheets and a smaller number of sheets of 
special media.

■

 is the standard input tray that holds up to 530 sheets of 20-lb. (75

g/m

2

) bond 

paper or 175 standard or premium transparencies.

■

 is the optional input tray installed immediately below Tray 1. It holds up to 

530 sheets of 20-lb. (75

g/m

2

) bond paper. Transparencies are not supported from this 

tray.

■

 is the optional input tray installed immediately below Tray 2. Like Tray 2, it 

holds up to 530 sheets of 20-lb. (75

g/m

2

) bond paper. Transparencies are not 

supported from this tray.

Trays 1, 2 and 3 all have paper-size sensing, low-paper sensing and tray-empty sensing. 
Paper levels are indicated on a gauge visible at the front of the tray. When the level reaches 
approximately 40 sheets, the 

low paper

 warning displays on the front panel.

The Multi-sheet Bypass Feeder (MBF) has tray-empty sensing, but not paper-size sensing.

Refer to Loading Print Media on page 13 for information on supported media and 

instructions on loading the trays.

Output Destinations

■

The standard face-down bin (see Front View on page 2) holds up to 500 sheets and 

receives prints face-down. It has bin full detection.

■

The face-up bin (see Rear View on page 3) holds up to 100 sheets and receives prints 

face-up (at the rear of the printer) .

Note

When the rear door is open, all prints are diverted to the face-up bin.

Note

Face-up bin does not have bin full detection.