Xerox Phaser 1235 产品宣传页
48
Phaser 1235 Network Color Printers
Managing Printer Usage
Setting Network Addressing
The procedure for setting Ethernet, Token Ring and Novell values requires a different
keying technique than does the basic menu navigation to set values for other menu items.
keying technique than does the basic menu navigation to set values for other menu items.
While the example below sets the Ethernet IP address, the technique is basically the same
for setting any of the following:
for setting any of the following:
■
Ethernet Menu
■
IP Address
■
Sub Net Mask
■
Default Gateway
■
Token Ring Menu
■
IP Address
■
Sub Net Mask
■
Default Gateway
■
LAA
■
Novell Menu
■
Primary Server
■
NDS Context
■
PServer Name
■
NDS Tree
To set the Ethernet IP address:
1
At the front panel, press Menu Up
†
or Menu Down until you see:
2
Press Item Up or Item Down until you see:
3
Press Value Up or Value Down and you will see:
if no address has been assigned (otherwise you will see the current value for the IP address). The
underline indicates the position of the cursor, which starts at the first digit.
underline indicates the position of the cursor, which starts at the first digit.
4
To change the value of the first digit, press Value Up
†
and you will see:
5
Press Value Up again and you will see:
Continue pressing Value Up until you have set the correct value for the first digit. (Pressing
Value Down will reduce the value of the digit by one.)
Value Down will reduce the value of the digit by one.)
Menus
Ethernet Menu
Ethernet Menu
Ethernet Menu
IP Address
IP Address
IP Address
000.000.000.000
000.000.000.000
IP Address
100.000.000.000
100.000.000.000
IP Address
200.000.000.000
200.000.000.000