Xerox Phaser 3020 用户指南

Loading Paper

Xerox® Phaser® 3020
User Guide

40

Loading Paper

Tray 1 is standard on your machine.

Various media sizes and types can be used in the tray. For more media specifications, refer to 

Media 

Specifications

.

Preparing Paper for Loading

Before loading paper into the tray, flex or fan the edges of the 
paper stack. This procedure separates any sheets of paper 
that are stuck together and reduces the possibility of paper 
jams.

Note:

To avoid unnecessary paper jams and misfeeds do 

not remove paper from its packaging until required.

Using Tray 1

Tray 1 is located on the front of your machine. It can be closed when not in use, making the product 
more compact. Use the tray to print on standard media as well as transparencies, labels, envelopes or 
postcards.

Use the manual mode for all special media.

Acceptable print media is plain paper from 3.0 x 5.0 inches to 8.5 x 14 inches Legal (76 mm x 127 mm 
to 216 mm x 356 mm) and weighing between 16 lb and 43 lb (60 g/m² and 163 g/m²). 

1.

Lower tray

 

1

, located on the front of the machine.

2.

Prepare a stack of paper for loading by flexing or fanning 
it back and forth. Straighten the edges on a level surface. 
Remove any curl on postcards, envelopes and labels 
before loading them into the tray.

Note:

In the automatic mode, the tray holds a maximum 

of 150 sheets of 20 lb (80 g/m²) bond paper, 1 
transparency sheet, or 1 envelope. In Manual Feeder 
mode, selected on the Paper tab in the print driver, the 
tray holds 1 sheet of all media types. Use of the Manual 
Feeder mode for special media is strongly recommended.

3.

Load the print material between the width guides with 
the print side facing up.

Note:

Hold a transparency

by the edge and avoid touching the print side.