Xerox Phaser 540 产品宣传页
Printing Reference
8-1
Chapter
8
Using the
Phaser 540 GX Driver
If you are using Apple System Software 7.5 and QuickDraw GX, use the
Phaser 540 GX driver to print to your Phaser 540 printer.
Phaser 540 GX driver to print to your Phaser 540 printer.
■
The Phaser 540 GX driver works with QuickDraw GX and
non-QuickDraw GX applications.
non-QuickDraw GX applications.
■
QuickDraw GX doesn’t work with non-QuickDraw GX printer
drivers. To print from non-QuickDraw GX applications using the
Tektronix Phaser 540 driver (based on the LaserWriter 7.1.2.
printer driver) described in Chapter 2, you must disable
QuickDraw GX. See page 8-22 for instructions on disabling
QuickDraw GX.
drivers. To print from non-QuickDraw GX applications using the
Tektronix Phaser 540 driver (based on the LaserWriter 7.1.2.
printer driver) described in Chapter 2, you must disable
QuickDraw GX. See page 8-22 for instructions on disabling
QuickDraw GX.
System requirements
Note
You must have an optional Phaser Share Card installed in the
printer before installing the driver.
printer before installing the driver.
The Tektronix Phaser 540 GX printer driver requires the following hardware
and software:
and software:
■
An Apple Macintosh II computer, or later
■
At least 8 Mbytes of memory
■
System Software version 7.5 and QuickDraw GX