Xerox Phaser 540 产品宣传页
9
Troubleshooting
9-8
Phaser 540 Drivers and Utilities
Random PostScript errors
If you are using AppleTalk Network Software below version 58.0, you may
experience a problem with random PostScript errors when printing. If this is
the case, you should upgrade the AppleTalk Network Software on your
Macintosh computer.
experience a problem with random PostScript errors when printing. If this is
the case, you should upgrade the AppleTalk Network Software on your
Macintosh computer.
The printing problem is due to a timing conflict between the older AppleTalk
software and the printer. The PostScript errors can be any type of error or
offending command, and may occur in any of the following situations:
software and the printer. The PostScript errors can be any type of error or
offending command, and may occur in any of the following situations:
■
May occur more often over LocalTalk than EtherTalk.
■
Sending the same file more than once may cause different errors or
offending commands each time, or the file may print without
an error.
offending commands each time, or the file may print without
an error.
■
Files from some applications may print, while files from other
applications may not.
applications may not.
■
Documents saved to PostScript files and sent to the printer with a
downloading utility may generate errors.
downloading utility may generate errors.
To upgrade your software
1.
Insert the AppleTalk Installer for the Macintosh diskette into your
computer’s disk drive. This diskette was shipped with your
printer.
computer’s disk drive. This diskette was shipped with your
printer.
2.
Double-click on the
Installer icon.
3.
Click
OK in the introduction screen.
4.
Click
Install in the Easy Install window to install the
recommended software. (Or, click
Customize to select
individual items.)
5.
After successful installation, click
Restart to restart
your computer.