Xerox Phaser 540 产品宣传页
Modifying Printer Operations
A
Printing Reference
A-11
Configuring a printer’s serial port for a PC
If your printer has the optional serial port installed, you can configure the
port using the DEVPARAM.PS file or using front panel selections. Refer to
your Phaser 540 Color Printer User Manual for information on configuring
serial ports from the front panel.
port using the DEVPARAM.PS file or using front panel selections. Refer to
your Phaser 540 Color Printer User Manual for information on configuring
serial ports from the front panel.
Note
To modify
DEVPARAM.PS you should be familiar with the
PostScript
setdevparams command. You should also know how
to use PostScript dictionaries and key value pairs.
You should edit the DEVPARAM.PS file before using other files to change
the printer’s performance.
the printer’s performance.
The following example sets these parameters:
■
Flow control to Xon/Xoff
■
Parity to none
■
Data bits to 8
■
Stop bits to 2
■
Baud rate to 9600
In this example, the changes are persistent across jobs and across printer
power cycles; they remain in effect until you change them again.
power cycles; they remain in effect until you change them again.
(%Serial_NV%) 6 dict begin
/Password
() def
/FlowControl
/XonXoff def
/Parity
/None def
/DataBits
8 def
/StopBits
2 def
/Baud
9600 def
currentdict end setdevparams