Xerox Phaser 540 产品宣传页
B
Using SCSI Hard Disks
B-4
Phaser 540 Drivers and Utilities
Initializing a formatted SCSI hard disk
Use this procedure to initialize a formatted SCSI hard disk connected to the
printer. Use one of the following files depending on your computer type.
printer. Use one of the following files depending on your computer type.
Macintosh users
1.
If you have not decompressed the Phaser 540 Utilities.sea archive
file on the Macintosh Driver and Printer Utilities diskette, follow
the instructions on page 2-11 to decompress this file.
file on the Macintosh Driver and Printer Utilities diskette, follow
the instructions on page 2-11 to decompress this file.
2.
Select the appropriate printer in the
Chooser.
3.
Locate the LaserWriter Utility file in the folder on your hard disk
containing decompressed utility files.
containing decompressed utility files.
4.
Double-click the
LaserWriter Utility icon.
5.
Choose
Initialize Printer’s Disk from the File menu. (This
option is grayed out (unavailable) if no SCSI disk is connected
to the printer.)
to the printer.)
6.
Select the file name; then click
Open.
PC and workstation users
1.
Locate the INITDISK.PS file in the PHSR540 directory on the
Tektronix Windows 3.1 Driver and Printer Utilities diskette.
Tektronix Windows 3.1 Driver and Printer Utilities diskette.
2.
Copy the file to your hard disk, or use the file from the diskette.
3.
Use one of the following methods to send the file to the printer:
■
PC users: Use the DOS COPY command or the Copy command in
Windows
Windows
File Manager to send the file to the printer. See page 3-20
■
Workstation users: Send the file to the printer as you would any
PostScript file.
PostScript file.
Macintosh file name
PC file name
LaserWriter Utility
INITDISK.PS