Xerox Phaser 540 产品宣传页
2
Printing From a Macintosh
2-2
Phaser 540 Drivers and Utilities
System requirements
Note
You must have an optional Phaser Share Card installed in the
printer before installing the driver.
printer before installing the driver.
The Phaser 540 printer driver for the Macintosh requires the following
hardware and software:
hardware and software:
■
An Apple Macintosh II computer (or later)
■
At least 4 Mbytes of memory
■
System Software version 6.0.7, or 7.0 and higher
Installing the driver
If the printer is shared on a network, install the same version of the Tektronix
driver on all Macintosh computers connected to the network.
driver on all Macintosh computers connected to the network.
1.
Make sure your Macintosh is powered up with System Software
version 6.0.7, or 7.0 or higher, installed.
version 6.0.7, or 7.0 or higher, installed.
2.
Insert the Macintosh Driver and Printer Utilities diskette into the
disk drive.
disk drive.
3.
Drag the
Phaser 540 driver icon from the diskette to the closed
System Folder icon on your Macintosh hard disk.
■
System 7.0 and higher, at the alert message, click
OK to
automatically install the driver in the Extensions folder.
■
System 6.0.7, the driver is installed in the System Folder.
4.
If you are using system 6.0.7, you need to install two files in the
Old System Items folder:
Old System Items folder:
■
Backgrounder V1.3
■
PrintMonitor V7.0
Drag these files to the closed
System Folder icon on your
Macintosh hard disk.