Xerox Phaser 540 产品宣传页

下载
页码 209
Printing From a Macintosh
2
Printing Reference
2-7
Using the LaserWriter 8.x printer driver
You can use Apple’s LaserWriter driver version 8.x with a Phaser 540 printer.  
Some applications, such as Aldus PageMaker 5.x, use the LaserWriter 8.x 
driver instead of the Tektronix driver.  
Installing the LaserWriter 8.x driver
Note
During installation, the LaserWriter 8.x driver leaves other 
versions of the LaserWriter driver intact so that this driver can 
co-exist with the Tektronix driver.
Refer to the LaserWriter driver’s documentation, LaserWriter 8.x Update 
Guide
, for instructions on installing the driver. 
Using the LaserWriter 8.x driver with a Phaser 540
The LaserWriter 8.x driver uses printer-specific 4.x PPDs (PostScript Printer 
Description files) for information on a printer’s page sizes, printing options, 
and media type options.  To use the LaserWriter 8.x driver with a Phaser 540 
printer, perform the following steps.  If the printer is busy, it may take some 
time to complete this procedure; you may want to perform it when the 
printer is idle.  You only have to configure the printer once.
1.
The Phaser 540 Apps.sea archive file on the Macintosh Driver and 
Printer Utilities diskette contains printer description files for the 
printer.  Follow the instructions on page 2-12 to decompress these 
files, then continue with the steps listed below. 
2.
Locate the 4.x PPDs Folder in the folder on your hard disk 
containing decompressed files.  
Open the folder and place the TKPH5401.PPD file with the other 
PPDs for the LaserWriter 8.x driver in the Printer Descriptions 
folder, in the Extensions folder, inside the System Folder.  
3.
Open the 
Chooser.
4.
Select the 
LaserWriter 8.x driver icon.