Xerox Phaser 240 用户指南
4
Caring for Your Printer
4-6
Phaser 240 Color Printer
Cleaning the paper-pick rollers
Make sure that the transfer roll is installed before you begin this cleaning
procedure.
procedure.
To clean the paper-pick rollers, you must use the cleaning tray from the
cleaning kit.
cleaning kit.
1.
Turn the printer off, then on again.
2.
Remove the paper tray(s), and remove the paper or transparencies
from one of the trays.
from one of the trays.
When removing paper or transparencies, do not push the paper
tray's metal plate down. (If the metal plate is down, put the paper
tray into the slot and pull it out; this returns the metal plate to the
up position.)
tray's metal plate down. (If the metal plate is down, put the paper
tray into the slot and pull it out; this returns the metal plate to the
up position.)
3.
If you are using an A4-size (metric) paper tray, break off the tabs
on the sides of the cleaning tray. The allows the cleaning tray to Þt
into the metric paper tray. Do not break off the tabs if you are
using an A-size (U.S.) paper tray.
on the sides of the cleaning tray. The allows the cleaning tray to Þt
into the metric paper tray. Do not break off the tabs if you are
using an A-size (U.S.) paper tray.
9238-25
3