Xerox Phaser 300X 安装指南
Printing From a PC
3
Printing Reference
3-37
Printing from DOS
Note
Driver-selectable TekColor color correction features are available
only though printer drivers such as the AdobePS 3 driver, the
AdobePS 4, or the Microsoft PostScript driver. Refer to Chapter
6,“Correcting Printed Colors,” for instructions on other ways of
selecting color corrections.
only though printer drivers such as the AdobePS 3 driver, the
AdobePS 4, or the Microsoft PostScript driver. Refer to Chapter
6,“Correcting Printed Colors,” for instructions on other ways of
selecting color corrections.
Note
If you are printing ASCII files directly to the printer, you will
need PCL5 activated on your printer; refer to page D-11 for
instructions.
need PCL5 activated on your printer; refer to page D-11 for
instructions.
Printing from a driver
Many DOS applications include printer drivers for Tektronix printers.
Check the application you are using for a printer driver for a Phaser 300X
printer. Install and use the driver according to the application’s
documentation.
Check the application you are using for a printer driver for a Phaser 300X
printer. Install and use the driver according to the application’s
documentation.
If the application you are using does not have a driver for a Phaser 300X
printer, do one of the following:
printer, do one of the following:
■
Check to see if other Tektronix Phaser series printers are listed,
and choose one of those drivers.
and choose one of those drivers.
■
If no Tektronix Phaser series printers are listed, you can use a
generic color PostScript printer driver. However, generic drivers
do not have information on the printer’s page sizes and image
areas, and images may be clipped or shifted when printed.
generic color PostScript printer driver. However, generic drivers
do not have information on the printer’s page sizes and image
areas, and images may be clipped or shifted when printed.
■
Contact the application’s vendor, or call Tektronix Customer
Support in the U.S. and Canada at 1-800-835-6100, for
printing information. Outside the U.S. and Canada, contact your
local Tektronix reseller.
Support in the U.S. and Canada at 1-800-835-6100, for
printing information. Outside the U.S. and Canada, contact your
local Tektronix reseller.
Refer to the Phaser 300X Color Printer User Manual for information on using
the DOS MODE command to disable timeouts on a parallel port.
the DOS MODE command to disable timeouts on a parallel port.