Xerox Phaser 300X 安装指南
7
Using Color
7-18
Phaser 300X Color Printer
Printing the entire chart
Macintosh
Use the LaserWriter Utility to download the PANTONE
®
Phaser 300X.ps file
to the printer. This is a PostScript file that contains the necessary color
correction and print quality information. Make sure you print the chart on
paper for best results.
correction and print quality information. Make sure you print the chart on
paper for best results.
Note
If you are using QuickDraw GX, you can print the PANTONE
Color sampler chart from the Tektronix Phaser 300X GX printer
driver; see page 2-23 for instructions.
Color sampler chart from the Tektronix Phaser 300X GX printer
driver; see page 2-23 for instructions.
1.
See page 2-2 to install the Pantone Files from the printer’s
CD-ROM. You also need to install the Printer Utilities option from
the Custom Install window.
CD-ROM. You also need to install the Printer Utilities option from
the Custom Install window.
2.
Locate the files in the PhaserTools folder on your hard disk.
3.
Select the appropriate printer in the Chooser.
4.
To print the chart, do the following:
a.
Locate the LaserWriter Utility in the PhaserTools folder on your
hard disk, and double-click its icon to start the application.
hard disk, and double-click its icon to start the application.
b.
Select Download PostScript File from the Utilities menu.
c.
Select the PANTONE
®
Phaser 300X.ps file, and click Open.
(This file was installed in the Pantone Files folder inside the
PhaserTools folder.)
PhaserTools folder.)
d.
At the prompt
Save PostScript output as:
you are
asked for a file name for saving printer output. Use the
default name given in the edit box or type in a new name.
Then click Save to send the file to the printer.
default name given in the edit box or type in a new name.
Then click Save to send the file to the printer.
e.
If no output is returned by the printer, the LaserWriter Utility
displays a dialog box; click OK to continue.
displays a dialog box; click OK to continue.