Xerox Phaser 300X 安装指南
Using Fonts
8
Printing Reference
8-3
Printing a font sampler from a Macintosh
You can print a sample of the printer’s resident fonts by downloading the
Fonts Sampler utility file to the printer.
Fonts Sampler utility file to the printer.
Note
If you are using QuickDraw GX, you can print the fonts sampler
from the Tektronix Phaser 300X GX printer driver; see page 2-22
for instructions.
from the Tektronix Phaser 300X GX printer driver; see page 2-22
for instructions.
1.
Use either the Phaser 300X printer’s CD-ROM or Printer Software
for the Macintosh diskette. Select Easy Install to automatically
install the printer’s software, or select Samplers in the Custom
Install
for the Macintosh diskette. Select Easy Install to automatically
install the printer’s software, or select Samplers in the Custom
Install
window on the printer’s CD-ROM. Refer to “Installing the
printer’s software” on page 2-2 for more information.
2.
Select the appropriate printer in the Chooser.
3.
Locate the LaserWriter Utility in the PhaserTools folder on your hard
disk, and double–click its icon to start the application.
disk, and double–click its icon to start the application.
4.
Choose Download PostScript File from the Utilities menu.
5.
Select the Font Sampler file from the list, then click Open. (This file
was installed in the Samplers folder inside the PhaserTools folder.)
was installed in the Samplers folder inside the PhaserTools folder.)
6.
At the prompt
Save PostScript output as:
you are asked
for a file name for saving printer output. Use either the default
name given in the edit box or type a new name.
name given in the edit box or type a new name.
7.
Click Save to send the file to the printer.
8.
If no output is returned by the printer, the LaserWriter Utility
displays a dialog box; click OK to continue.
displays a dialog box; click OK to continue.