Xerox Phaser 300X 安装指南

■

Check to make sure you have configured the communications 
ports and the Handshake option correctly.  Refer to page A-6 to 
print a configuration page for helpful information.  

■

Make sure you are using the correct cables for your computer and 
printer.  See the Phaser 300X Color Printer User Manual for cable 
information.  

■

Make sure your printer is connected to the port you selected in the 
driver’s Printers/Connect dialog box.  

■

Try resetting the Transmission Retry timeout option in the 
driver’s Printers/Connect dialog box to 850 seconds.  

■

Check the Options dialog box to make sure Printer, not 
Encapsulated PostScript File

, is selected in the driver’s 

 box.  

■

If the error message 

 appears on your computer 

screen, open the driver’s Options dialog box and turn on the Send 
Header with Each Job

■

Make sure your printer is connected to the port you selected in the 
driver’s Details tab.

■

Try resetting the Transmission Retry timeout option in the 
driver’s Details tab to 850 seconds.  

■

Make sure the correct port is selected in the driver’s Details tab. 

■

If the error message 

 appears on your computer 

screen, click the PostScript tab and click one of the options for 
PostScript Header