Xerox Phaser 300X 安装指南
9
Troubleshooting
9-16
Phaser 300X Color Printer
Check the printer’s language mode
If your file doesn’t print, the language on the printer’s port you are using
may have been changed.
may have been changed.
Note
PCL5 is optional and must be authorized before you can use it; see
page D-11 for instructions.
page D-11 for instructions.
1.
Print a copy of the printer’s configuration page to see the language
mode on each port. Refer to page A-6 for instructions on printing
a configuration page.
mode on each port. Refer to page A-6 for instructions on printing
a configuration page.
2.
If the printer port you are using has the wrong language set for the
type of application you are using, send one of the following utility
files to the printer:
type of application you are using, send one of the following utility
files to the printer:
■
To print PostScript files, use the PSCRIPT.PS file to set up a port to
receive PostScript; see page D-6 for details.
receive PostScript; see page D-6 for details.
■
To print HP-GL files, use the HPGL.PS file to set up a port to receive
HP-GL; see page D-6 for details.
HP-GL; see page D-6 for details.
■
To print PostScript, or HP-GL, or PCL5 files interchangeably, use
the AIS.PS file to set up a port for automatic language selection; see
page D-6 for details.
the AIS.PS file to set up a port for automatic language selection; see
page D-6 for details.