Xerox Phaser 300X 安装指南
Modifying Printer Operations
A
Printing Reference
A-11
Resetting the printer
The Reset Printer (RESET.PS) file resets the printer to its power-on conditions
(not its factory default conditions), without turning the printer’s power
switch off and on. The power-on conditions include any custom changes
made to the printer that are stored in the printer’s NVRAM, or changes that
are persistent across printer power cycles. For example, if you used a
downloadable utility file to change the printer’s name or to set a color
correction, these are power-on conditions that are not altered by resetting the
printer. Resetting the printer erases changes that are not persistent across
printer power cycles, such as the Tektronix error handler utility.
(not its factory default conditions), without turning the printer’s power
switch off and on. The power-on conditions include any custom changes
made to the printer that are stored in the printer’s NVRAM, or changes that
are persistent across printer power cycles. For example, if you used a
downloadable utility file to change the printer’s name or to set a color
correction, these are power-on conditions that are not altered by resetting the
printer. Resetting the printer erases changes that are not persistent across
printer power cycles, such as the Tektronix error handler utility.
This file restarts the printer as soon as all the jobs in its queue are finished.
The printer remains unavailable while it initializes. Use the following files
for your computer type.
The printer remains unavailable while it initializes. Use the following files
for your computer type.
Macintosh users
Note
Do not use the Restart Printer command in the LaserWriter
Utility’s Utilities menu. Follow this procedure to reset
the printer using the LaserWriter Utility to download the
Reset Printer utility file.
Utility’s Utilities menu. Follow this procedure to reset
the printer using the LaserWriter Utility to download the
Reset Printer utility file.
1.
Install the utility files from the Phaser 300X printer’s CD-ROM;
refer to page 2 for instructions.
refer to page 2 for instructions.
2.
Select the appropriate printer in the Chooser.
3.
Locate the LaserWriter Utility in the PhaserTools folder on your hard
disk, and double–click its icon to start the application.
disk, and double–click its icon to start the application.
4.
Choose Download PostScript File from the Utilities menu.
5.
Select the Reset Printer file in the list then click Open.
(This file was installed in the Printer Utilities folder inside the
PhaserTools folder.)
(This file was installed in the Printer Utilities folder inside the
PhaserTools folder.)
Macintosh file name
PC file name
Reset Printer and
LaserWriter Utility
LaserWriter Utility
RESET.PS