Xerox Phaser 300X 安装指南
Using SCSI Hard Disks
B
Printing Reference
B-3
Macintosh users
1.
Install the utility files from the Phaser 300X printer’s CD-ROM;
refer to page 2 for instructions.
refer to page 2 for instructions.
2.
Select the appropriate printer in the Chooser.
3.
Locate the LaserWriter Utility in the PhaserTools folder on your hard
disk, and double–click its icon to start the application.
disk, and double–click its icon to start the application.
4.
Choose Download PostScript File from the Utilities menu.
5.
Select the Format Printer Disks file from the list, then click Open.
(This file was installed in the Printer Utilities folder inside the
PhaserTools folder.)
(This file was installed in the Printer Utilities folder inside the
PhaserTools folder.)
6.
At the prompt
Save PostScript output as:
you are asked
for a file name for saving printer output. Use either the default
name given in the edit box or type a new name.
name given in the edit box or type a new name.
7.
Click Save to send the file to the printer.
8.
If no output is returned by the printer, the LaserWriter Utility
displays a dialog box; click OK to continue.
displays a dialog box; click OK to continue.