Xerox Phaser 300X 安装指南
Using SCSI Hard Disks
B
Printing Reference
B-7
Enabling and disabling SysStart Job execution
The Set SysStart Job (SYSTART.PS) file enables automatic execution of a file
named SysStart (if one is found) on a hard disk connected to the printer’s
SCSI port, each time the printer is turned on or reset. The SysStart job is
similar to an Init file; it executes automatically each time the printer is
turned on.
named SysStart (if one is found) on a hard disk connected to the printer’s
SCSI port, each time the printer is turned on or reset. The SysStart job is
similar to an Init file; it executes automatically each time the printer is
turned on.
Use the following files for your computer type:
Macintosh users
1.
Install the utility files from the Phaser 300X printer’s CD-ROM;
refer to page 2 for instructions.
refer to page 2 for instructions.
2.
Select the appropriate printer in the Chooser.
3.
Locate the LaserWriter Utility in the PhaserTools folder on your hard
disk, and double–click its icon to start the application.
disk, and double–click its icon to start the application.
4.
Choose Download PostScript File from the Utilities menu.
5.
Select one of the following files from the list, then click Open.
(These files were installed in the Printer Utilities folder inside the
PhaserTools folder.)
(These files were installed in the Printer Utilities folder inside the
PhaserTools folder.)
■
Use the Set SysStart Job file to enable automatic execution of the
SysStart job.
SysStart job.
■
Use the No SysStart Job file to disable automatic execution of the
SysStart job.
SysStart job.
Macintosh file name
PC file name
Set SysStart Job
No SysStart Job and
LaserWriter Utility
No SysStart Job and
LaserWriter Utility
SYSTART.PS
NOSYSSTR.PS
NOSYSSTR.PS