Xerox Phaser 300X 安装指南
Using Different Printer Language Modes
D
Printing Reference
D-7
Testing printer language mode changes
HP-GL mode
HPGLTEST.PLT is an HP-GL file that prints a single line of text if the printer
is operating in HP-GL mode.
is operating in HP-GL mode.
Send the HPGLTEST.PLT file to the printer after you send HPGL.PS or
AIS.PS, to make sure the language change was made correctly.
AIS.PS, to make sure the language change was made correctly.
PostScript mode
PSTEST.PS is a PostScript file that prints a single line of text if the printer is
operating in PostScript mode.
operating in PostScript mode.
Send the PSTEST.PS file to the printer after you send PSCRIPT.PS or AIS.PS,
to make sure the language change was made correctly.
to make sure the language change was made correctly.
Sending a language test file to the printer
1.
Copy the utility files from the Phaser 300X printer’s CD-ROM, or
use the files directly from the CD-ROM.
use the files directly from the CD-ROM.
2.
Use one of the following methods to send a file to the printer:
■
PC users
: Use the DOS COPY command to send the file to the
printer. (Windows 3.1 users can also use the Copy command in the
File Manager
File Manager
.)
■
Workstation users:
Send the file to the printer as you would any
utility file.