Xerox Phaser 300X 安装指南
3
Printing From a PC
3-20
Phaser 300X Color Printer
Using the printer with Windows NT
These instructions assume a basic familiarity with Windows NT operation
and terminology. For additional information about Windows NT, refer to
your Microsoft Windows NT documentation.
and terminology. For additional information about Windows NT, refer to
your Microsoft Windows NT documentation.
Updating the driver software
Note
You may need your original Windows NT setup diskettes (or
CD-ROM) to complete this procedure if you need to install a
PostScript printer in Step 4.
CD-ROM) to complete this procedure if you need to install a
PostScript printer in Step 4.
1.
Start your system with Windows NT.
2.
If your computer has an Intel-compatible processor, such as the
Intel I386, go on to Step 3.
Intel I386, go on to Step 3.
If your computer is a MIPS, Alpha, or PowerPC, you need to edit
the PRINTER.INF file on the Phaser 300X printer’s CD-ROM.
the PRINTER.INF file on the Phaser 300X printer’s CD-ROM.
a.
The Phaser 300X printer’s CD-ROM is read-only
(write-protected). To edit the PRINTER.INF file, copy the
following files from the WIN95_NT directory on the CD-ROM
to a new, formatted floppy diskette.
(write-protected). To edit the PRINTER.INF file, copy the
following files from the WIN95_NT directory on the CD-ROM
to a new, formatted floppy diskette.
Note
You only need one of the PPD files; select the one for your
printer’s configuration. If you are not sure which configuration
of the printer you have, the printer’s startup page lists this
information under Extended Features: Yes/No. See page A-2
for instructions on printing a copy of the printer’s startup page.
printer’s configuration. If you are not sure which configuration
of the printer you have, the printer’s startup page lists this
information under Extended Features: Yes/No. See page A-2
for instructions on printing a copy of the printer’s startup page.
Place all files at the top (root) level of the new diskette.
TEK1
PRINTER.INF
TKP300X1.PPD (for the standard version of the printer)
TK300XP1.PPD (for the printer’s extended features option)
PRINTER.INF
TKP300X1.PPD (for the standard version of the printer)
TK300XP1.PPD (for the printer’s extended features option)
b.
Open the copy of the PRINTER.INF file on the new diskette in
a text editor such as Notepad.
a text editor such as Notepad.