Xerox DocuTech 6100 Production Publisher 用户指南

 
DT6180 HandyBook 

27  

 
Regular operator maintenance of your equipment is likely to improve overall 
performance.  The maintenance could be done at the beginning or end of the 
shift,  which ever is decided upon by your team.  The following are suggested 
maintenance activities. 
 
1.  Clean All Sensors.   
 
2.  Full Shutdown and Restart. 
 
3.  Check and Fill Fuser Agent. 
 
4.  Shift handoff communication between operators regarding system issues 

encountered on previous shift. 

 
5.  Clean Dicorotron Shields (NOTE: Only perform this task if you have been 

eXcellerate Trained.  Refer to your eXcellerate  training materials for 
details.) 

 
 
 

 

 

Clean Finisher Entrance Sensor (Q1201)

  

Clean the Bin A Bindexer Sensor (Q1205)

  

Clean the Bin B Bindexer Sensor (Q1206)

 

Clean the Binder Tape Guide Sensor (Q1213)

 

Clean the Bindexer Sensors (Q1205, Q1206, Q1207)

 

Clean the Bins Exit Sensors (Q1222)Error! Bookmark not defined.

 

Clean the Front Stack (Q1227), Rear Stack Height (Q1218), and Set Path (Q1221) 
Sensors

 

Clean the Fuser (Q1010) and Prefuser Sensors (Q1009)

 

Clean the Post Inverter (Q1202) and Output Transport (Q1203) Sensors

 

Clean the Pre-Fuser Sensor (Q1009)

 

Clean the Registration Transport Sensor (Q861)

 

Clean the Set Path Sensor (Q1221)

 

Clean the Tape Binder Area