Xerox DocuColor 12 Printer with Matchprint Professional Server 用户指南
Matchprint Professional Server for Xerox DocuColor 12 User Guide
©2002 Kodak Polychrome Graphics. All Rights Reserved.
102
Save Your Current Settings
The Save Matchprint Configuration utility is a simple backup to disk procedure
designed to protect your RIP configuration setup in the event that software needs to
be reloaded.
designed to protect your RIP configuration setup in the event that software needs to
be reloaded.
Once you’ve configured hot folders, spoolers, printers, preferences and color target
adjustments, perform the following Save Configuration Procedure. In the event
you need to reload software, you can re-establish these configurations by performing
adjustments, perform the following Save Configuration Procedure. In the event
you need to reload software, you can re-establish these configurations by performing
the Restore Configuration procedure.
Note: When un-installing the software via Add/Remove Programs, you will also
be given a list of items that can be saved to another folder. There is some
duplication between the Save/Restore Configuration feature and the items saved
when removing the software. We recommend using both methods to ensure
complete recovery after re-installing the software.
be given a list of items that can be saved to another folder. There is some
duplication between the Save/Restore Configuration feature and the items saved
when removing the software. We recommend using both methods to ensure
complete recovery after re-installing the software.
Save Configuration Procedure
Important! The Save/Restore Configuration Feature is not supported when
upgrading from a previous version to v3.0. If you are upgrading from a
previous release to v3.0, contact your service representative for additional
instructions.
upgrading from a previous version to v3.0. If you are upgrading from a
previous release to v3.0, contact your service representative for additional
instructions.
1. To access the Save Matchprint Configuration utility, go to Start >
Programs > Kodak Polychrome Graphics > Save Matchprint
Configuration. The following dialog appears:
2. Click on Save Configuration.
3. Insert a disk into drive A as instructed and press OK. After the configuration
is saved to the disk, the following verification dialog appears.