Xerox DocuColor 12 Printer with Matchprint Professional Server 用户指南
Matchprint Professional Server for Xerox DocuColor 12 User Guide
©2002 Kodak Polychrome Graphics. All Rights Reserved.
26
Page Alignment
One printing concern that occurs on most duplex copiers is that the second side page
image alignment can be out of register from the first page anywhere between 1/32"
to 1/2". This deficiency is caused by the mechanical components of the copier rather
than the data generated by the Matchprint Professional Server. A technician can
make adjustments to correct this problem, but the adjustment will shift after regular
image alignment can be out of register from the first page anywhere between 1/32"
to 1/2". This deficiency is caused by the mechanical components of the copier rather
than the data generated by the Matchprint Professional Server. A technician can
make adjustments to correct this problem, but the adjustment will shift after regular
usage of the copier.
The Matchprint Professional Server now has a feature that can help correct this
problem.
problem.
Notes:
Properly functioning printer hardware can be adjusted to position the page
correctly to within 1/16". When paper misalignment is excessive, worn
paper grab bars or other hardware components may be the cause. If this is
paper grab bars or other hardware components may be the cause. If this is
the case, the printer should be serviced before using this procedure.
Only paper size A5 and larger can be used to make the print alignment
adjustment. Smaller sizes increase the risk of hardware misalignment and
are of insufficient size to print the alignment form.
Duplex page alignment is available only if the printer, tray and media
permit. Only simplex (single-sided) page alignment is provided for premium
and extra heavy weight media. Premium and extra heavy weight media
cannot be duplexed.
and extra heavy weight media. Premium and extra heavy weight media
cannot be duplexed.
There may be a slight twist feed or paper skewing when paper goes through
trays 1-4. The DocuColor 12 has a skewing tolerance of 3mm, but this is
dependent on the limitations of the output device. If paper skewing is
dependent on the limitations of the output device. If paper skewing is
excessive, contact your service representative.
Page Alignment does not support Custom Page Size.
1. From the Printer menu, select the printer from the drop-down list box.
2. The Printer Settings window displays: